6 Preface TM9300/TM9400 Installation Guide
© Tait International Limited August 2020
Publication Record
Issue Publication Date Description
01 September 2012 First release.
02 December 2012 TM9400 added.
03 November 2013 Hand-held control head added
Caution about using Y-type breakout cable added
04 May 2014 Information added about using an analog
channel to check TM9300 forward and reflected
power
05 December 2015 Remote head extender upgrade kits added.
Component names to configure an external alert
device changed.
06 September 2020 Minor changes to text throughout
Added safety information regarding jump-starting
without removing the fuses to “Radio Protection
when Charging the Vehicle Battery” on page 10
Updated maximum gain values in “RF Exposure
Hazard” on page 8
Added information regarding the ribbon cable to
“Mounting the Control Head” on page 27
Deleted all references to defunct product CD that
used to be supplied with the service kit
To Next Page
Loading...
