TM9300/TM9400 Installation Guide Installation Options 13
© Tait International Limited August 2020
Security Bracket The TMAA03-02 security bracket
can be used in place of the standard
U-cradle in locations to prevent
opportunistic removal of the radio by
a third party, or where you want to
have a quick release setup that
allows you to swap over radios (e.g.
leasing situation). The security
bracket also provides electrical
isolation to the radio. Refer to the
installation instructions
(402-00014-xx) provided with the
security bracket for full details.
Re-install Kits Re-install kits allow you to remove radios from one installation and re-
install them at another location without having to remove the wiring from
the old installation.
The following kits are available:
■ TMAA03-20 (30-50W radios with BNC antenna connector)
■ TMAA03-10 (30-50W radios with mini-UHF antenna connector)
■ TMAA03-11 (25W radios with BNC antenna connector)
■ TMAA03-15 (25W radios with mini-UHF antenna connector)
Re-install kits contain the parts left behind after removing the radio:
■ power cable with DC connector
■ fuses with in-line fuse holders
■ receptacles for a remote speaker (remote speaker not included)
■ crimp terminals for a remote speaker
■ antenna connector
To Next Page
Loading...
