6.5. CLEANING DURING OPERATION
26
In certain areas sawdust and wood residues begin to compile during the operation and must regularly
be removed:
1 - Wood residues under the machine. If you fail to clean the wood residues, they can clog the area
behind the splitting cylinder and prevent the cylinder from returning to the home position. This can
increase the pressure during machine idling, as well as cause overheating.
2 - Wood residues under the conveyor drive cylinder can damage the conveyor belt.
3 - Sawdust ejected by the chainsaw must be removed regularly to prevent the sawdust to fill up the
drain channel.
1
2
3
To Next Page
Loading...
