EC DECLARATION OF CONFORMITY
Manufacturer:
TAJFUN Planina, proizvodnja strojev d.o.o., Planina pri Sevnici 41a, 3225 Planina pri Sevnici
declares with full responsibility that the product mentioned hereafter:
FIREWOOD PROCESSOR
covered by this declaration complies with the requirements of:
Machinery Safety Rules – Official Gazette of the Republic of Slovenia No. 75/2008
(Directive 2006/42/EC)
in compliance with the following standards:
EN ISO 4254-1:2009; EN ISO 12100:2010; EN ISO 13857:2008;
EN 349:1993+A1:2008; EN 609-1999+A2:2009; ISO 4413:2010
Authorized person for technical documents operating at the manufacturer’s location is also the
signee of this statement:
Planina, 20. 05. 2020
Iztok Špan
Director
41
Type: Factory number:
RCA 480 JOY 240431 - XXXXX
RCA 480 JOY PLUS 240326 - XXXXX
To Next Page
Loading...
