15
WARNING
• DO NOT locate the remote controllers where they may come into contact with water.
•
•
•
• -
SULATION PLATE SHOULD BE PROVIDED BEHIND THE MOUNTING POSITION.
REMOTE CONTROLLER INSTALLATION
1. Crimp the fork terminals provided to the wires.
• Minimum 18AWG wire (No polarity)
• Maximum 100m long
2.
controller.
3. Install the wiring downward through the cable trench and
4.
Use the fork terminals
25 mm
45 mm
REMOTE CONTROL WIRING
Connector base
83.5 mm
To Next Page
Loading...
Need help?
General
