Takeuchi TB215R - Restarting after Adding Fuel; Bleeding Air from the Fuel System

6-8
TROUBLESHOOTING
RESTARTING AFTER ADDING
FUEL
BLEEDING AIR FROM THE FUEL SYSTEM
RESTARTING AFTER ADDING FUEL
1. Add fuel.
2. Open the valve (2) of the water separator
and the fuel filter.
3. Turn the starter key to the ON position and
hold it for about 10 to 15 seconds.
The automatic air bleeder bleeds air from
the fuel system.
Note: Air in the fuel system causes the
engine to fail to start or to have other
pr
oblems. Always bleed air when the fuel
tank is emptied or when there is air in the
fuel system.
Turn the starter key to the ON position and
hold it for about 60 seconds.