Takeuchi TB215R User Manual

2-17
CONTROLS
INSTRUMENT CLUSTER
• Alarm time setting mode
Sets the time for alarm.
a. Select the item to be set in the alarm
setting screen (ALARM SET).
b. Press and hold the (B) key for at least
three seconds to enter the alarm time
setting mode.
c. Pr
ess the (A) key in this screen to move
the selection bar and to flash the figures
on the bar.
Setting range: hours, 1 to 24; minutes,
00 to 59
d. Pr
ess the (B) key to increase the number
value selected.
Press and hold the (B) key to rapidly
increase the number value selected.
e. Press and hold the (A) key for at least
two seconds to complete the setting and
to return to the Setting Selection screen.
f. Press the (C) key to cancel editing and to
return to the Setting Selection screen.
• Contrast setting (CONTRAST)
Adjust the LCD contrast.
a. When the selection bar is at CONTRAST,
press the (A) key to proceed to the
contrast setting screen (CONTRAST).
b. To increase contrast, press the (B) key.
The bar advances to the right.
Press and hold the (B) key to rapidly
advance the bar.
Once the bar reaches the right end
(highest contrast), it returns to the left
end (lowest contrast).
c. Pr
ess and hold the (A) key for at least
three seconds to complete the setting
and to return to the Setting Selection
screen.
d. Press the (C) key to cancel editing and
to return to the Setting Selection screen.
The changes made to the setting are
reflected, but they will be removed when
the starter switch is turned off.

Takeuchi TB215R Specifications

General

Brand	Takeuchi
Model	TB215R
Category	Excavators
Language	English