5-7
MAINTENANCE
SERVICE DATA
* : If the ratio of traveling time to total operating time is high, replace the gear oil earlier than
the specified time.
** : For water, use tap water (soft). Do not use well or river water. When the ambient
temperature drops below 0°C (32°F), add coolant (antifreeze). Follow the coolant
manufacturer’s instructions to determine the mixture ratio.
*** : The hydraulic oil replacement interval depends on the type of hydraulic oil being used. New
machine are delivered with Takeuchi genuine hydraulic oil 46, and the hydraulic oil
replacement intervals indicated in this manual assume that Takeuchi genuine hydraulic oil
46 is being used. When using conventional antiwear hydraulic oil, the hydraulic oil should
be replaced every 2000 hours.
API standard: American Petroleum Institute
ACEA standard: Association des Constructeurs Européens d’Automobiles
JASO standard: Japanese Automobile Standards Organization
SAE standard: Society of Automotive Engineers
Volume
Engine oil pan
Engine cooling
system
Hydraulic oil
tank
Fuel tank
Travel reduction
gear
Upper limit
7.4 L (7.8 US qt.)
Lower limit
4.0 L (4.2 US qt.)
11 L (11.6 US qt.)
System
90 L (23.8 US gal.)
Tank
49 L (12.9 US gal.)
Level capacity
81 L (21.3 US gal.)
76 L (20.1 US gal.)*
0.8L X 2
(0.85 US qt.) X 2
*: When the auto fuel supply pump is stopped
To Next Page
Loading...
Need help?
General
