EasyManua.ls Logo

Takeuchi TB260 - Cleaning the Radiator Fins and the Oil Cooler Fins

Takeuchi TB260
305 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-39
MAINTENANCE
CLEANING THE RADIATOR FINS AND
THE OIL COOLER FINS
Wear required appropriate equipment
such as protective goggle and filter mask
when using compressed air, as metal
fragments or other objects can fly and
cause serious injury.
IMPORTANT: Be careful not to damage
the fins when cleaning.
• When using compressed air or
pressurized water, make sure the
pressure is no higher than 200 kPa (28
psi) and hold the nozzle sufficiently
away from the fins.
IMPORTANT: When using water, cover the
electrical system to prevent water from
getting in.
IMPORTANT: When operating the
machine in very dusty places, perform
inspection and maintenance operations
every day.
EVERY 250 HOURS
1. Open the engine hood.
2. Remove the screws (1) and open the
condenser.
3. Blow compressed air on the fins to
remove mud and dirt stuck on them.

Table of Contents

Related product manuals