5-61
MAINTENANCE
INSPECTING AND REPLENISHING THE
WINDSHIELD WASHER FLUID
Choose ethyl alcohol as washer solution.
Do not use methyl alcohol as washer
solution. It could damage the eyes.
Use a windshield washer fluid designed
specifically for motor vehicles. Follow the
instructions included with the washer fluid.
WHEN REQUIRED
Inspection
1. Open the right side cover.
2. Inspect the washer tank (1) and add
washer fluid if the level is low.
Replenishing
1. Mix the washer fluid to the prescribed
concentration.
2. Remove the cap (2) and add washer fluid.
Keep the dust away while replenishing the
washer fluid.
3. Install the cap (2).
DRAINING THE WATER FROM THE
WATER SEPARATOR
• Do not smoke or permit open flames
while handling fuel or working on the
fuel system.
• Stop the engine in a well-ventilated
place and allow it to cool down before
performing maintenance.
• Clean up spilled fuel immediately.
<Applicable machine models 126000002
or later>
<Applicable machine models 126100003
or later>
1. Open the engine hood.
2. Place a pan under the drain valve (7) to
catch fuel.
3. Open the drain valve (7) and drain the
water.
If the water does not drain easily, loosen
the plug (8).
To Next Page
Loading...
Need help?
General
