Takeuchi TB260 User Manual

2-33
CONTROLS
INSTRUMENT CLUSTER
M. ECM error warning indicator
This warning lamp flashes if the Electronic
Control Module (ECM) detects an engine
problem while the starter switch is in the
ON position. The problem detected is
recorded as an ECM error.
Refer to “Engine error code list” on pages
6-14 to 6-21.
N. Water separator warning indicator
This lamp flashes if the water is detected
within the water separator while the starter
switch is in the ON position.
Refer to “If a warning lamp flashes” on
page 6-10.
O. DPF manual regeneration under way/
regeneration promoting indicator
This indicator starts flashing and an alarm
starts sounding, if the accumulated PM
exceeds the limited amount on the DPF.
Immediately perform the manual DPF
regeneration.
Refer to “DPF manual regeneration/inhibit
select switch” on page 2-52.
P. Exhaust temperature warning indicator
This indicator lights up to warn if the
exhaust temperature is abnormally
increased. Check for any flammable items
around the exhaust piping.
Q. Fuel filter warning indicator
This lamp flashes and an alarm is sounded
if the fuel filter is clogged while the engine
is running.
R. Auxiliary 3rd hydraulic pressure
warning indicator (If equipped)
This warning lamp starts flashing and an
alarm sounds if the pressure in the fixed
side (left “e”) of the Auxiliary 3rd drops
abnormally while the engine is running, or
while the quick-hitch is being used for
changing the bucket.
S. Maintenance warning indicator
When the time for maintenance set by the
trip meter is reached, this warning lamp
flashes and an alarm sounds.
When the time for maintenance set by the
trip meter is reached, the screen is
changed from the Main to the Trip Meter
for Maintenance on the DATA screen.
Each value remains flashing until its
corresponding key is pressed. At this
stage, the trip meter values cannot be
reset. Pressing any key returns to the
Warning (Page 3) of Main screen in which
the maintenance warning lamp is flashing
and the alarm is sounding. Promptly
inspect and service the relevant item.
Refer to “Menu/Trip meter reset” on page
2-35.
Refer to “Maintenance” on page 5-1.

Takeuchi TB260 Specifications

General

Brand	Takeuchi
Model	TB260
Category	Excavators
Language	English