2-43
CONTROLS
6. Timer
Press TIMER (6) momentarily to directly
access timer mode. Briefly press TIMER to
start the timer function, and the “TIMER”
icon will flash in the display. Press TIMER
again to stop the timer, and the “TIMER” icon
will remain in the display (without flashing).
Press the button again briefly to resume the
timer, or press and hold it for three seconds
to reset it to zero and to remove the “Timer”
icon from the display.
7. Volume
Briefly press VOL+ (7a) or VOL– (7b) to
adjust the volume up or down one step.
Press and hold VOL+ or VOL– for more than
one second to continuously adjust the
volume level until the button is released.
The current volume level (0 to 40) will appear
in the display when the volume is adjusted,
returning to the default display three seconds
after the adjustment is complete.
8. Setting the Clock
To set the clock to display the current time,
press DISP for more than three seconds to
enter clock setting mode, and the time will
flash in the display. Press TUN– (8a) to adjust
the hours or TUN+ (8b) to adjust the
minutes. When no adjustment is made for
ten seconds, the time will be set and normal
operation will resume.
ACCESSORIES
9. Audio and Menu Adjustment
Audio Adjustment
Press AUDIO/MENU (9) momentarily to step
through the following audio adjustment
options: Bass, Treble and Balance (left to
right). When the desired option appears in
the display, press VOL+ (7a) or VOL– (7b) to
adjust that audio feature. When no
adjustments have been made for three
seconds, the unit will resume normal
operation.
Menu Adjustment
Press AUDIO/MENU for more than three
seconds to enter menu adjustment mode
and adjust any of the menu options: When
the desired option appears in the display,
press VOL+ or VOL- to adjust that menu
option. When no adjustments have been
made for three seconds, the unit will resume
normal operation. The following menu
options may be adjusted using this feature:
• Beep Confirm (On or Off) - Determines if a
beep will be heard each time a button is
pressed.
• Operation Region (USA or Euro) - Selects
the appropriate operating region.
• Clock Display (12 or 24) - Selects a 12-
hour or 24-hour clock display.
• Display Brightness (Low, Mid or High)
- Determines brightness level of the
display.
• Backlight Color (Amber or Green) -
Determines the backlight color of the unit.
• Turn On Volume (0-40) - Selects desired
volume level for the unit to assume when
turned on.
• WB Alert (On or Off) - Determines if the
weather band alert feature is activated.
To Next Page
Loading...
Need help?
General
