II – 5
SPECIFICATIONS
SPECIFICATION TABLES
SPECIFICATION TABLES
SPECIFICATIONS
Standard Bucket Capacity
Rated Capacity m
3
Struck Capacity m
3
Machine Mass (not including operator) kg
Dimensions
Overall Lenght: with bucket/without bucket mm
Overall Width: with bucket/without bucket mm
Overall Height mm
Minimum Ground Clearance mm
Front Clearance Radius: with bucket/without bucket mm
Rear Clearance Radius mm
Overall Width of Crawler mm
Bucket Width mm
Angle of Departure degree
Working Range
Maximum Lift Height to Bucket Pin mm
Maximum Dumping Height mm
Maximum Dump Angle Fully Raised degree
Maximum Bucket Rollback at Ground Level degree
Reach Fully Raised mm
Performance
Breakout Force kN
Travel Speed 1 st/2 nd km/h
Gradeability degree
Ground Pressure kPa
Tipping Load kg
Cycle Time
Raise-Full Load (Lift Arm) Sec.
Lower-No Load (Lift Arm) Sec.
Dump-Full Load (Bucket) Sec.
Curl-Full Load (Bucket) Sec.
Serial Number
Type
0.351
0.260
3325
3430/2740
1675/1580
2235 (2120
∗
)
310
2080/1375
1585
1580
1675
30
3030
2370
39
30
730
29.9
7.3/10.4
30
33.3
2100
4.2
2.7
2.7
2.1
21300004~
REV. 1
∗: 21300004~21301098
Canopy Cab
←
←
3410
←
←
2235
←
←
←
←
←
←
←
←
←
←
←
←
←
←
←
←
←
←
←
←
To Next Page
Loading...
Need help?
General
