Lifting instructions:
The angle between the perpendicular and the sling chain must lie between 0° and 45°.
Risk of injury from falling or sinking load!
Too weak dimensioned sling equipment can break.
Transport vehicles can fail or topple if they are not designed for the weight of the partly
completed machinery.
Falling or toppling machines may lead to serious personal injury.
Lifting equipment, industrial trucks and sling equipment have to comply and designed
to the rules for the weight of the machine including.
It is prohibited to stand under suspended loads or raised machine parts.
Damage arising from improper transport!
Improper transport can cause significant damage to property.
Take care and take note of the symbols on the packaging when unloading the
partly completed machinery on delivery and when transporting it on the premises.
Use slinging equipment with sufficient load capacity.
Align slinging equipment in load direction.
If the recommended angle between perpendicular and the sling chain or sling strap
exceeds 45° the load capacity of the sling equipment is reduced.
Fig. 6 Lifting instructions
To Next Page
