Taktomat RTX350 - Lubrication

Operating instructions
Mechanical installation
Page 30 of 35
Rotary indexer RTX
Version 1.0.0
5.6 Lubrication
5.6.1 Requirements for lubricants
General
To ensure safe operation and a long service life, it is necessary to lubricate the machine carefully. The specified oil
and grease must be applied to all lubrication points.
Carefully clean dirty lubrication points using a suitable agent and then lubricate them with new lubricant. After
lubrication, any excess lubricant must be removed and properly disposed of.
Lubricating oil
Use only lubricating oil compliant with DIN 51 517 (ISO VG 460 )
Recommended gear oil:
Manufacturer
Designation
Mobil
Mobilgear 600 XP 460
BP
Energol GR-XP 460
SHELL
Omala 460
LIQUI MOLY
meguin Getriebeöl CLP 460
Zeller+Gmelin
Divinol ICL ISO 460
Klüber
Klüberoil GEM 1 N
Lubricating grease
Use only lubricating grease compliant with DIN 51 825-KP 2K.
Recomended lubricating grease:
Manufacturer
Designation
Specification
Mobil
Mobilux EP2
KP2 K-30
BP
Energrease LS-EP 2
KP2 K-20
Aral
Aralub HLP 2
KP2 N-30
Fuchs-DEA
Renolit MP
KP2 K-40
Klüber
Centoplex 2
KP2 K-20
SHELL
Alvania G2
KP2 N-20
Note:
Only use lithium soap based grease for lubrication. The use of greases based on different materials causes gummy
deposits, decomposes the grease and destroys its lubricating properties.