REFER TO INSTRUCTION MANUAL/BOOKLET!
This symbol signifies that the instruction manual/booklet of the component supplier must be read.
2.2 Intended use
The partly completed machinery is intended for installation in a surrounding construction, thus integrating it to form
part of an overall system. The partly completed machinery is controlled by the overall system. The functions of the
protective equipment are also connected to the partly completed machinery via the controller. The partly completed
machinery may only be operated as part of a CE-compliant system.
Customer specific constructions are mounted on the Rotary indexer. They’re used as support for different products.
The Rotary indexer has a fixed or flexible division (for an exact design see data sheet). The Rotary indexer is inside a
safety enclosure or is installed in another work equipment. The safety enclosure or assembly are realized by the
integrator. This also applies to the electrical connection and control.
Any use that deviates from the intended use is regarded as inappropriate use.
This includes:
• any use outside the permitted operating limits
• any use in conjunction with foodstuffs
• any use in conjunction with aggressive materials (such as acids)
• transporting the system using the designated lifting points or eye bolts
The manufacturer shall not be liable for any damage resulting from such use. Intended use also includes observance
of all the information in these instructions.
To Next Page
Loading...
