2 Safety information
General information
This document contains important information on the safe use of the partly completed machinery. This information is
intended to ensure personal safety and prevent damage to the partly completed machinery. The information is
intended for the operator and for properly trained, qualified and instructed staff responsible for operating and
servicing the partly completed machinery.
Additional task-specific safety information is included in the relevant sections on the different phases during the
service life of the system.
2.1 Explanation of the symbols used
2.1.1 Warnings
DANGER!
This combination of symbol and alert word indicates an inherently dangerous situation which can
be fatal or cause serious injury if it is not avoided.
WARNING!
This combination of symbol and alert word indicates a potentially dangerous situation which can
be fatal or cause serious injury if it is not avoided.
CAUTION!
This combination of symbol and alert word indicates a potentially dangerous situation which can
cause minor injury if it is not avoided.
NOTICE!
This combination of symbol and alert word indicates a potentially dangerous situation which can
cause damage to property or harm the environment if it is not avoided.
To Next Page
Loading...
