Taktomat RTX350 - Page 27

Mechanical installation
Operating instructions
Version 1.0.0
Rotary indexer RTX
Page 27 of 35
The switching range of the output flange is shown in the figure below. Correspondingly, the figure shows the
switching range of the cam, which corresponds to the milled off area of the cam.
Fig. 11 Switching range
Switching range
Cogging range
Example: Rotary indexer, 4 stations (90°), switching time 0.8 s, switching angle 300°, cogging range 60°
Output flange
90°
300°