Talkpod A36plus - Operating Modes; Frequency, Channel, and AM Modes; Menu and Dual PTT Modes

All rights reserved. © 2012-2023 Shenzhen Talkpod Technology Co., Ltd.
Operating Modes
Frequency Mode
In standby mode, press and hold the "Menu" key to switch to FR mode.
You can use the "Up" and "Down" keys to change the frequency or
directly enter the desired full-frequency frequency using the numeric
keys.
Channel Mode
In standby mode, press and hold the "Menu" key to switch to CH mode.
In this mode, you can use the "Up" and "Down" keys to change the
channel number or directly enter the desired channel using the numeric
keys. At least one memory channel needs to be programmed; otherwise,
you cannot enter this mode.
In channel mode, press and hold the "Back" key to switch between
channel name mode, channel frequency mode, and channel number
mode.
AM Mode
When the operating frequency is between 108-136MHz, the device
automatically enters AM aviation reception mode, and the channel status
displays AM. This mode is mainly used to receive AM modulated signals.
Menu Mode
Press the "Menu" key, and then use the "Up" and "Down" keys to select
the desired menu option.
Dual PTT Mode
By selecting menu item 40, you can set "Side Key 2" as PTT2, enabling
dual PTT mode. Press the PTT key to transmit segment A, and press "Side