All rights reserved. © 2012-2023 Shenzhen Talkpod Technology Co., Ltd.
Function Description
▍Alarm Function
Press and hold the "SOS Key" for 2 seconds to activate the alarm function.
During the alarm, if a transmission frequency is set for the channel, the
radio will automatically transmit.
To exit the alarm state, press the "PTT Key".
▍Dual PTT Function
When "Side Key 2" is set to PTT B, the radio enters dual PTT mode.
Pressing PTT will transmit on option A, and pressing PTT B will transmit
on option B.
◉ Set this function through menu item 40.
▍Scan Function
The scan function can be set using menu item 40 ("Side Key 2 Short
Press"), menu item 41 ("Side Key 2 Long Press"), and menu item 42 ("Side
Key 3 Short Press").
When in scan mode, press the "Menu Key" to switch between various
frequency bands such as UHF (400-520MHz), VHF (136-174MHz), 200
(200-260MHz), 350 (350-400MHz), etc.
When the transceiver is within the effective range, press and hold the PTT
key to quickly display the frequency and sub-audio.
After displaying the frequency and sub-audio on the screen, press the
"Menu Key" again to store it.
Select the channel number to store by using the up and down keys. If
"CH" is displayed, it means that it has already been stored and will directly
To Next Page
Loading...