All rights reserved. © 2012-2023 Shenzhen Talkpod Technology Co., Ltd.
1.Plug the charger power plug into a 220V AC socket.
2.Place the battery or the radio with the battery inserted onto the
charging dock, or connect the USB charging cable to the battery's USB
port.
3.Confirm that the charging indicator turns red, indicating that charging
has started.
4.Charging takes approximately 8 hours. When the indicator turns green,
it indicates that the charging is complete.
Maintenance and Cleaning
1.Do not directly hold the antenna, earphone, or microphone.
2.Use a non-lint cloth to wipe off dust and dirt on the radio to prevent
poor contact.
3.When the radio is not in use, cover the earphone jack with the plug
cover.
4.After prolonged use of the radio, the buttons, control knobs, and casing
may become dirty. You can clean them using a mild detergent (avoid
using strong corrosive chemicals) and a damp cloth.
To Next Page
Loading...