Talkpod A36plus - RPT-RL, S-CODE, DTMF CODE, DTMFST Menu Settings

All rights reserved. © 2012-2023 Shenzhen Talkpod Technology Co., Ltd.
Options: 120
degrees, 180
degrees, 240
degrees
Choose the corresponding
phase based on the relay
station to resolve the tail
tone noise.
24
RPT-RL
1-10s
When relaying signals
through a relay station, to
confirm if the relay station
has relayed the signal,
utilize the delay time when
the relay station stops
transmitting. This allows
the local machine to
confirm that the signal has
been relayed. This menu is
used to adjust the
duration of this noise.
Off
If you don't need this
noise, you can turn off this
menu.
25
S-CODE
1-15
Select from 1 to 15 signal
options.
26
DTMF
CODE
Off
Disable DTMF code
transmission.
PTT Key
Transmit DTMF code by
pressing the PTT key.
Simultaneous
Transmit DTMF code when
pressing and releasing the
PTT key simultaneously.
Release PTT
Transmit DTMF code by
releasing the PTT key.
27
DTMFST
Off
When transmitting,
pressing keys to transmit
DTMF codes does not