Talon CD Duplicator
7
Make Multiple Copies at Once from a Master CD
Overview
This procedure explains how to set the system up for making multiple
duplicates at once. The first CD drawer will hold the Master CD, and the
remaining drawers will contain the copies:
Select “Copy”
for the
Operation
Status
1. Turn on the system. Note the Status of operation in the LCD display
area (copy, emulate, etc.). If copy is not already displayed as the
current Status of operation, press the Status button until copy is
displayed. Your LCD display should look something like this:
Access the
Sub-Function
Menu
2. Press and hold the Status button until you hear the system “chirp.”
Then release the Status button. You should see setup displayed in the
LCD panel:
Set the Start
Writers Sub-
Function to the
# of writers
3. Press the Start button, and view the start writers sub-function. The
default for this setting is the number of writers in the system. Press the
Status button as many times as is necessary to display the number for
this setting. This ensures that all CD writers are available for making
copies:
Display
“setup” in the
LCD display
panel
4. Press the Start button as many times as is necessary to cycle through all
of the other sub-functions until you display setup in the LCD Display
panel:
To Next Page
Loading...