Talon Pro - Speed and Drive Settings; Write Speed and CDROM Drive Selection

Talon CD Duplicator
26
Write Speed
This setting controls the maximum writing speed of the CD writers. The default setting is MAX
which will use the highest writing speed of the writers (52X). For applications requiring a lower
write speed, change this setting using the Status button to adjust the writing speed. The options
are listed below.
Options:
1
2
4
6
8
10
12
16
20
24
32
40
48 (newer Statusls)
MAX (default)
CDROM Drive
The CD-ROM (Reader) drive can be selected manually. The default setting is auto, which
implies that the first drive (top drive) is automatically selected as the reader drive. This option is
rarely changed, but if you wish to change the default reader drive to another drive other than the
top, then press the Status button to select one of the options as listed below.
Options:
ATA2.0
ATA3.0
ATA4.0
ATA5.0
ATA6.0
ATA7.0
ATA8.0
Auto (default)
[Q]
cdrom drive
[*] auto
[Q]
write speed
[*] MAX