Talon CD Duplicator
23
Sub-Function Details
To access the Sub-Function menu:
§ From the operation Status (copy, compare, etc.), press and hold the STATUS button until it
chirps. Release it. You should see setup in the LCD display. When setup is displayed, press
the START button. If setup is already displayed in the LCD panel, then press the Start button.
The Sub-Function menu includes the following sub-functions. Each sub-function is described in detail in
this section:
Sub-Function Page
show drives
24
start writers
25
write method
25
write speed
26
cdrom drive
26
autoloader
27
load nonblank disc
27
cdda load speed
27
eject disk
27
buzzer
28
CD+G
29
copycomp eject
29
read cdda index0
30
skip read error
30
Status 2 compare
31
startup command
31
To Next Page
Loading...