Talon Pro - Ejection and Buzzer Settings; Eject Disc and Buzzer Options

Talon CD Duplicator
28
Eject Disc
The eject disc sub-function controls the ejection of the discs by the CD writers. Three options
are available by pressing the Status button:
§ Always means the CD writers will always eject the CD discs whether the duplication is
successful or not.
§ No means all discs will remain in the CD writers when the job is done. You will then need to
eject the disks from the CD writers manually.
§ The Pass setting, which is the default setting, will eject only the successfully duplicated discs
and leave the failed discs in the CD writers. You must press the Status button to eject the
failed CDs.
Options:
Pass (default)
Always
No
Buzzer
The Buzzer sub-function is not used in the Talon Pro Pro system.
Options:
On (default)
Off
[Q]
buzzer
[*] On
[Q]
eject disc
[*] Pass