Talon CD Duplicator
4
Copy an Audio CD Now!
Overview
This procedure explains how to set the system up for CD to CD duplication
and how to make a copy of a master audio CD.
The purpose of this procedure is to give you a quick start to using the Talon
Pro Duplicator. You will learn more advanced procedures, such as how to
set up for duplicating Karaoke CD masters, how to load various tracks from
multiple CDs into a partition on the hard drive, how to copy up to seven CDs
at a time, etc., once you have learned a few of the basic procedures.
Select “Copy”
for the
Operation
Status
1. Turn on the system. Note the Status of operation in the LCD display
area (copy, emulate, etc.). If copy is not already displayed as the
current Status of operation, press the Status button until copy is
displayed. Your LCD display should look something like this:
Access the
Sub-Function
Menu
2. Press and hold the Status button until you hear the system “chirp.” Then
release the Status button. You should see setup displayed in the LCD
panel:
Back to
“Copy” Status
3. Press the Start button, and note that the copy Status is once again
displayed. (In this case, all other sub-function defaults will be used, so
there is no need to change any other sub-function options at this time.)
Insert the
Master CD
4. Place the master CD in the first CD drawer. Use the Open/Close button
to open and close the CD drawer.
To Next Page
Loading...