Talon Pro - Special Functions; Copy;Emulate Speeds and Developer Functions

Talon CD Duplicator
33
Copy x1
Emulate x1
Copy x2
Emulate x2
Copy x4
Emulate x4
Copy x8
Emulate x8
Burn In
This function is used by the system developer to test the system. General users are to ignore this
function.
Update
This function is used by system developers to update the firmware of the system. General users
are to ignore this function unless instructed to do so by Talon service personnel.
When setup appears in the LCD display panel, press and hold the Status button to return to an operation
Status.
Under some conditions, you may wish to reduce the writing speed of the
CD writers. Switch to any of these copy or emulate speeds and the
writing speed of the system will be adjusted accordingly