Talon Pro - Karaoke CD Configuration; Write Method, CD+G, and Final Settings

Talon CD Duplicator
12
Copying Karaoke CDs (continued)
Back to
“Copy” Status
4. Press the Start button, and note that the default operation Status is once
again displayed. In the example below the default operation Status is
copy:
Access the
Sub-Function
Menu Again
5. Press and hold the Status button until you hear the system “chirp.”
Then release the Status button. You should see setup displayed in the
LCD panel:
Change the
Write Method
Sub-Function
Setting to
“Disc At
Once”
6. Press the Start button until you view the write method option:
Press the Status button to change the setting to Disc At Once if it is not
already so (as shown above).
Change the
CD+G Sub-
Function
Setting to
“Yes”
7. Press the Start button until you view the CD and G option:
8. Press Status button to change the CD+G setting to Yes. The CD +G
setting, when switched to Yes, enables the duplication of CDs that have
CD+Graphics: audio, text and graphics used in the same application.
This type of disc is usually used for Karaoke machines.
Accept all
other Sub-
Function
Defaults
9. Press the Start button until you view the setup option:
[Q]
CD+G
[*] Yes
Start>
setup
<Status
[Q]
CD+G
[*] No
[Q]
write method
[*] Disc At Once
A553M62:57
Start>
setup
<Statu
s
copy
<Status