EasyManua.ls Logo

Talsa W22 - English; Table of Contents

Talsa W22
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MINCERS / GRINDERS
MANUAL
EN-17
ENGLISH
Talsabell S.A.U.
www.talsanet.com
EORI: ESA46428025
TALSA Products are designed and
manufactured to the highest
European standards. Proper
installation, operation and
maintenance are essential for best
performance and years of trouble-
free use.
This manual should be retained for
future reference. Read,
understand and follow the
instructions and warnings
contained in this manual.
The carrier is solely responsible
for damage caused during
transport. Carefully inspect the
condition of the container upon
arrival. If you discover damage, or
suspect concealed damage, note
this on the delivery receipt and
immediately notify the carrier.
The information contained in this
document is known to be current
and accurate at the time of
printing. TALSA is not responsible
for inaccuracies contained herein
attributable to printing or
transcription errors.
In line with our policy of continually
improving our products, TALSA
reserves the right to change
materials and specifications
without notice.
INSTALLATION AND USE MANUAL FOR
MINCERS / GRINDERS
Table of Contents
Illustrations
Labeled Diagram
Spare Parts List
Main Components
Drawings
Electrical Diagrams
1. For Your Safety
1.1 Important Warnings!
1.2 Operating Hazards!
1.3 Electrical Hazards!
1.4 Tips & Useful Information
2. Description, Features & Use
3. Technical Specifications
4. Storage, Transport & Delivery
5. Installation
6. Changing the Voltage
7. Operating Instructions
8. Mincing / Grinding Systems
8.1 Recommendations Concerning Plates and Knives
8.2 Dismantling/Assembling the Cutting Set and Worm
9. Cleaning
9.1 General Cleaning Recommendations
9.2 Recommended Cleaning Intervals
9.3 Stainless Steel Care
10. Maintenance
10.1 Knife Maintenance
11. Troubleshooting Guide

Table of Contents