TANDBERG Remote Control - Answer an incoming call; Using the Do Not Disturb feature

12
Answer an incoming call
The RISE Network has set each unit to Auto Answer, so you will not have to
manually answer a call.
For privacy reasons, the microphone is switched to OFF when you receive an
incoming call. Be sure to turn your microphone to ON if you would like to say
something.
Using the Do Not Disturb feature
Block incoming calls
When Do Not Disturb is
set to ON, all incoming
calls are blocked from
your system. Most calls
on the RISE Network are
scheduled and
expected, so this
function is not often
necessary.