Tangent AMP-100 User Manual

OPERATION AND FUNCTIONS
1. Press the FUNCTION button on the front panel or the remote until information on balance control is displayed.
2. Turn the volume control to adjust balance.
Note
If the balance control is not operated within five seconds, the display will return to the volume information display.
This amplifier features balance control that allows adjustment of the volume of one loudspeaker at a time by +/- 38,75 dB, divided
into 13 steps.
This function is used to compensate for a non-centred listening position, and makes it possible to get back the stereo perspective.
Balance control
1. Press the FUNCTION button on the front panel or the remote until information on loudness is displayed.
2. Turn the volume control to the right to activate the loudness function and to the left to deactivate the loudness function.
Note
If the loudness function is not operated within five seconds, the display will return to the volume information display.
This amplifier features a loudness function that allows boosting of the volume of the low frequencies at low volume.
This function is active at frequencies between 20Hz and 800Hz, and the function is dampened when the amplifier volume is
increased. When the volume is at the maximum setting, the loudness function is completely cut out.
Loudness
17
1
2
1
2

Tangent AMP-100 Specifications

General

Brand	Tangent
Model	AMP-100
Category	Amplifier
Language	English