Name: Tangent EXEO AMP
Brand: Tangent
Rating: 4 (1 reviews)

To Next Page

To Previous Page

REAR

PANEL INFORMATION

1 2 3 4 6

8 9

1. PHONO: For connection of a turn table (Note: Additional ground terminal available above inputs)

2. CDP: For connection of a CD player e.g. EXEO CDP

3. NET: For connection of a NET tuner e.g. EXEO NET

4. DAB: For connection of e.g. a DAB tuner

5. AUX1 : For connection of a line level source

6. PRE OUT: For connection of e.g. a external power amplifier

7. REC OUT: For connection of e.g. an external tape deck.

8. SUB OUT: For connection of e.g. an active subwoofer

9. SPEAKER OUT: For connection of loudspeakers

Note: The speaker impedance must be 4-8 Ohms. For optimal sound quality there must be a proper connection between the

speaker terminal and the amplifier terminal. The cable ends must not be frayed, to avoid that they come into contact with each

other, or the cabinet back panel.

10. AC MAINS INPUT: For connection of mains voltage. Make sure that the plug is correctly inserted, and that the voltage

corresponds to the text printed on the back panel of the cabinet.

Note: All audio inputs and outputs are analogue.

Questions and Answers:

Need help?

Do you have a question about the Tangent EXEO AMP and is the answer not in the manual?

Tangent EXEO AMP Specifications

General