10
10. PREVIOUS (I<<)
Press this button to choose the previous track or chapter on the disc loaded in the unit.
11. CARD/USB
Press this button to select the USB or card reader.
12. SOURCE
Press this button to change between input sources.
(DVD, USB, Card, AV1, AV2, FM, AM, AUX, TV, AV3)
13. STATION
Press this button to change between radio presets.
14. Disc tray
15. Headphones.
Use this output to connect headphones. Please notice that if the receiver is playing multi channel
surround sound, the sound in the headphones will be downmixed stereo. When the headphones are
connected, the speaker outputs will turn off. Make sure that the headphones you wish to use, have a
standard 6,3mm jack connecter. If not, you can use an adapter to match the 6,3mm jack.
Note: Please be aware of that high volume levels can damage your hearing!
16. Tuning + and –
Press and hold these buttons for two seconds to search for radio channels.
17. Power.
Press the power button to set the receiver into standby. The standby LED will turn red. Press the power
button once again, to turn on the receiver on again. The standby LED will turn green.
To Next Page
Loading...
Need help?
General
