23
Video Out
Here you can adjust the video output settings to match your setup.
YUV: Activates the component video output. You can change between progressive scan and interlaced scan
by pressing the P.SCAN button on the remote.
RGB: Activates the RGB video output in the Scart connecter.
Note: This setting is disabled when the HDMI output is activated.
Angle Mark
Some DVD movies are recorded in multiple angles.
The Angle Mark feature enables the MCS-650 to tell you if more than one angle is available. When the Angle
Mark is set to ON, a small icon in the shape of a camcorder is shown on the screen. When Angle Mark is set
to OFF, this icon will not be shown.
To Next Page
