GENERAL INFORMATION
1.3 Package Contents
Package contents may vary according to the turnstile models. Make sure that the package
contents below are complete. If you find any deficiency or fault, please contact TANSA.
A standard turnstile package should include:
•
1 pcs LTT 3XX Turnstile
•
3 turnstile arms (6 turnstile arms on double turnstile models)
•
1 pcs cover opening key
•
1 pcs shock absorber hex key
•
Stud and nut for fixing
•
User manual
1.4 Hardware changes
As the IP44 protection of the turnstile becomes invalid in any change made on the turnstile,
any mechanical or electronical change shall not be made without the permission of TANSA, and
TANSA shall not be liable for any problems that may arise otherwise. The intended change must
be notified in writing to TANSA in advance. Additional technical information, warnings and
precautions may be provided by TANSA if necessary.
1.5 Symbols and definitions
The symbols and descriptions in the user manual are shown below.
Important information and useful tips on using the turnstile.
Warning against dangerous situations in terms of life and property.
| 8 |
To Next Page
Loading...