TaoTronics TT-AH006 - Product Diagram; Specifications; How to Use

03/04
How to Use
• Place the humidier on a at surface
• Lift the water tank and unscrew the water tank cap located at the
bottom of the tank
• Fill the water tank with clean water. Close the water tank cap and
place the water tank back onto the main body
• When the power plug is connected, the humidier will make a
beeping sound. The low water-level indicator may ash due to the
time needed for the water to ll the water chamber inside the main
body. Just wait until it stops ashing
• When the water runs out, low water-level protection will automatically
cut power to the main circuit and venting fan. Mist output will stop
and the low water-level indicator will start ashing
Model
Working Voltage
Power Consumption
Water Tank Volume
Output Level
Working Time
Noise Level
TT-AH006
AC 120V/60Hz (US/CA)
AC 230V/50Hz (UK)
Cool Mist：35W Max.
Warm Mist: 130W Max.
6L / 1.59 Gal
Level 1: 150±30mL/h
Level 2: 250±30mL/h
Level 3: 350±30mL/h
Level 1: 40 hours
Level 2: 20 hours
Level 3: 15 hours
≤38dB(A)
Specications Product Diagram
①
②
③
④
⑤
⑥
⑦
Nozzle
Water Tank
Water Filter
Water Tank Cap
Control Panel
Main Body
Air Filter
⑦