TaoTronics TT-AH006 User Manual

07/08
• When the water tank is full, do not move it as the water might overow
or ow into the body and cause damage.
• Do not add water through the nozzle directly under the tap.
• After each use, turn off the unit and unplug the power outlet.
• Do not pour water into the water tank when the power is on or when
the power plug is plugged in.
Cleaning the Water Tank
Before cleaning, make sure the unit is turned off and the power plug is
unplugged.
• Cleaning the water tank regularly (recommended once every 2-3
weeks): Remove the water tank plug, wipe off any lime scale, and
rinse with clean water.
• Cleaning the base (recommended once a week): Wipe the base with a
soft cloth dipped with a mild cleaning agent and rinse off with clean water.
• Cleaning the humidier: Rinse a soft cloth in warm water and wipe off
surface stains. You can rinse the nozzle under tap water directly.
• Storing the humidier: When the unit has not been used for a long time,
clean and dry the unit and store it in a dry place in the original package.
Troubleshooting Guide
Sleep Mode
Touch the Sleep Mode button to enter sleep mode. In sleep mode, the
beep sound is disabled. In sleep mode, all lights on the display will turn
off except the Sleep icon. Tap on any button to wake up the display. In
sleep mode, all buttons are functional except for the Warm Mist and
Control Lock Buttons. Press and hold the Sleep Mode Button for 1.5s to
exit sleep mode.
Control Lock
Touch the the Control Lock button for 1.5s to lock all other control
buttons. This will prevent any button from being pressed by accident. A
white LED on the display screen indicates the control is in lock mode.
Touch the Control Lock button for 1.5 seconds to turn off the lock mode.
Important
• Do not touch the water tank or any component while the unit is working.
• Do not exceed the max level when adding water.
• Stop using when the water level is low.
• Do not power on the humidier when the water tank is not in place.
• Never add water hotter than 40°C / 104°F to avoid any possible
damage or malfunction of the device.
• Do not pour water through the mist nozzle. Wipe off any water outside
the body with a dry cloth.
• When the room temperature is 0°C / 32°F or below, please empty
water from the unit, as ice will damage the components.
• Do not place metals, chemicals, or detergents into the water to avoid
any possible damage or malfunction of the device.
Humidity Level
Touch the Humidity Button to set the humidity value for the environment.
Once set, the humidity value icon will ash 4 times to conrm. The mist
output will continue until the preset humidity value is achieved. Select
--% to turn off this function.
%
Problem Causes Solutions
No power source
Power not turned on
Low water
The device is
getting too hot
Connect power plug
Tap the Power button to
turn on the humidier
Add water into the
water tank
Power off and place in
a well ventilated place
for 10 minutes
No mist
coming out

TaoTronics TT-AH006 Specifications

General

Brand	TaoTronics
Model	TT-AH006
Category	Humidifier
Language	English