irlS[alla[iorl irlstrucuorl_5
TOOLS YOU WILL NEED
# 1 and #2 Phillips screwdriver Pencil
Ruler or tape measure
straight edge
Carpentersquare
(optional)
Tin snips (for cutting
damper, if required)
Gloves
Safetygoggles
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Electric drill with 3/16", 1/2"
and S/s"drill bits
Stud finder or Hammer (optional)
Level
Duct and masking tape
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
MOUNTING SPACE
Bottom edge of "
cabinet needs
to be 33" or
more from the "
cooking
surface
Q
Backsplash
NOTES:
The space between the cabinets must be
30" wide and free of obstructions.
This microwave oven is for installation over
ranges up to 33" wide.
If you are going to vent your microwave
oven to the outside, see Hood Exhaust
Section for exhaust duct preparation.
When installing the microwave oven
beneath smooth flat cabinets be careful
to follow the instructions on the top
cabinet template for power cord
clearance.
To Next Page
Loading...
