Need help?Do you have a question about the Taramps HD3000 and is the answer not in the manual?
Provides essential advice for optimal amplifier usage and installation.
Explains LED indicators for status, distortion, and protection modes.
Details essential wire gauge and fuse recommendations for safe amplifier installation.
General| Power Output at 1 Ohm | 3000 W RMS |
|---|---|
| Signal to Noise Ratio | >90 dB |
| Number of Channels | 1 |
| Operating Class | D |
| Minimum Supply Voltage | 9 VDC |
| Maximum Supply Voltage | 16 VDC |
| Frequency Response | 10Hz - 20KHz |
| Power Supply | 12.6 VDC |
To Next Page
