Need help?Do you have a question about the Taramps DS 250x2 and is the answer not in the manual?
Key recommendations for optimal amplifier use, covering connection and safety advice for proper installation and operation.
Provides information on the amplifier's operational status, indicating when the unit is powered on.
Instructions for connecting speakers, detailing polarity and minimum impedance for stereo and bridged configurations.
Guidance on connecting the main power terminals to the battery and the remote terminal to the head unit.
Details the amplifier's safety features, such as automatic shutdown for short circuits or low impedance.
Specifies recommended wire gauges and fuse ratings for power supply, output, and remote connections for safety and performance.
General| Number of Channels | 2 |
|---|---|
| Operating Class | D |
| Maximum Power @ 13.8 VDC - 2 OHMS | 500W RMS x 2 |
| Maximum Power @ 13.8 VDC - 4 OHMS | 250W RMS x 2 |
| Power Output: 250W RMS x 2 @ 4 Ohms | 250W RMS x 2 |
| Power Output: 500W RMS x 2 @ 2 Ohms | 500W RMS x 2 |
| Power Output: 1000W RMS x 1 @ 4 Ohms (Bridged) | 1000W RMS x 1 |
| Impedance Output | 2 Ohms |
| Consumption at Rest | 0.8A |
| Bass Boost | 0 to 12 dB |
| Protection System | Short Circuit, Overload |
| Maximum Supply Voltage | 16V |
| Operating Voltage | 12V |
To Next Page
