Need help?Do you have a question about the Taramps TS 400X4 and is the answer not in the manual?
General| Number of Channels | 4 |
|---|---|
| Signal to Noise Ratio | >90dB |
| Input Impedance | 10k Ohms |
| Minimum Supply Voltage | 9 VDC |
| Maximum Supply Voltage | 16 VDC |
| Consumption at Rest | 0.8 A |
| Power Output | 400W RMS |
| Impedance | 2 OHMS |
| Power @ 13.8 VDC @ 2 OHMS | 100W x 4 |
| Power @ 13.8 VDC @ 4 OHMS (Bridge) | 200W x 2 |
Contact information and support channels for international and factory assistance.
Important guidelines for optimal amplifier usage and installation.
Explanation of the amplifier's LED status indicator.
Details on short-circuit and thermal protection mechanisms.
Specifications for power supply, output cables, and protection fuses.
To Next Page
