Need help?Do you have a question about the Taramps DS 2000X4 and is the answer not in the manual?
Essential guidelines for safe and proper amplifier usage, covering warnings and cautions.
Details on connecting audio signals via RCA or automatic remote triggering for amplifier input.
Sets the amplifier's input sensitivity for optimal output signal levels with various head units.
Configures the amplifier's operating mode (Full, HPF, LPF) for different speaker types and frequency ranges.
Instructions for connecting speakers, including polarity and impedance considerations for stereo and bridged setups.
Details on connecting the power terminals (+/-) and the remote terminal to the battery and head unit.
Explains the meaning of LED indicators and the amplifier's protection modes and auto-restart functionality.
Specifies the correct wire gauges for power, speaker, and remote connections, and the recommended fuse rating.
General| Channels | 4 |
|---|---|
| Signal to Noise Ratio | >90dB |
| THD + N (10% of Rated Power) | <1% |
| Maximum Supply Voltage | 16V |
| Power Output | 2000W |
| Power @ 12.6V @ 2 Ohms | 4 x 500W |
| Power @ 12.6V @ 4 Ohms (Bridge) | 2 x 1000W |
| Damping Factor | 200 |
| Input Impedance | 10kΩ |
To Next Page
