Taramps BASS 5K User Manual

A instalação deste produto deverá ser feita por um profissional qualificado.
The installation of this product must be made by a qualified professional.
5KBASS

Taramps BASS 5K Specifications

General

Number of Channels	1
Impedance	2 Ohms
Signal to Noise Ratio	>90dB
Input Impedance	10K Ohms
Power @ 2 Ohms	5000W RMS
Power Output	5000W RMS

Summary

Term of warranty

Technical assistance

Introduction

Safety requirements

Ensures proper use by detailing warnings and cautions for amplifier operation.

Functions, inputs & outputs

Input/Output and Remote Connections

Covers RCA inputs, speaker outputs, and remote terminal connections for signal and control.

Signal Adjustment Controls

Details controls for input sensitivity, crossover filters, and bass boost for audio tuning.

Monitoring Output

Describes the connection for monitoring amplifier status via indicator LEDs.

Power supply and LED indicators

Power Supply Connector Details

Details power terminals, remote connection, and cable gauge recommendations.

Internal Fans and Ventilation

Explains the dual internal fans and the importance of proper ventilation for cooling.

LED Indicators and Protection System

Describes the meaning of ON, CLIP, and PROT LEDs for amplifier status and protection modes.

Installation

Recommended Wire Gauge & Fuse

Provides specifications for power supply, output, and remote cables, plus fuse/breaker ratings.

Technical features