Need help?Do you have a question about the Taramps DS800X2 and is the answer not in the manual?
Essential guidelines for optimal amplifier use and safety.
Details connecting signals to RCA outputs using shielded cables to avoid noise.
Sets amplifier input sensitivity for optimal output signal levels from audio sources.
Variable adjustment from 80Hz to 2.2KHz for the amplifier's operating frequency.
Selects amplifier operating mode: FULL, HIGH PASS, or LOW PASS.
Explains the function of the ON LED indicator for amplifier status.
Guides on connecting speakers, including polarity and minimum impedance requirements.
Details connecting the positive, negative, and remote terminals to the power source.
Describes the amplifier's short-circuit protection mechanism.
Specifies recommended wire gauges and fuse ratings for safe installation.
To Next Page
General
