Targa DVH-5100x - Setting the Clock Manually; To Set the Colour System

18
Setting the clock Manually
The clock in your VCR controls time and date
settings for your VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a
Teletext signal. If the broadcast signal is weak
the clock will not be set and will require setting
manually.
1. Press i.
Press 1 or 2 to select TIME DATE.
Press OK.
The auto adjust mode can be set to “OFF” by
pressing
D or E if you want to set the time manually.
Press OK.
2. Use the numbered buttons on the remote control
to alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically
when you enter the year.
3. If you make a mistake press 1 or 2 and enter the
correct details.
4. Press i.
To set the colour system
1. Press i.
2. The main menu will appear on the TV screen.
3. Press 1 or 2 to select the SYSTEM and press OK.
4. Press 3 or 4 to select according to the COLOUR
system used.
5. Press 1 or 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
6. Press i to remove the menus from the TV screen.
HH MN DD MM YY
:..- -
- -
- - - -
- - - - -
i
12
TIME
DATE
NIC
REC
i
Pr-12
ACMS
P
SET
R
12
TIME
DATE
SYS-
TEM
SYS-
TEM
Dr.
VCR
OSD
ON
OFF
OSD
f
16:9
4:3
OPR
AUTO
PAL
MESECAM
HH MN DD MM YY
:..00 1 01 04 THU
i
12
TIME
DATE
8
OSD
ON
OFF
OSD
f
16:9
4:3
OPR
REC
i
Pr-12
ACMS
P
SET
R
12
TIME
DATE
SYS-
TEM

SYS-

TEM

Dr.
VCR
NIC
RF I/I
RF B/G
RF D/K
AUTO ADJUST
- -
i
12
TIME
DATE
ON:
OK