Targus ACP45 - S;PDIF Device Configuration; Installing and Configuring S;PDIF

15
Targus Universal Laptop Docking Station
Installing and Configuring a S/PDIF
(Sony/ Philips Digital Interface)
Device
1 In order to enable S/PDIF, you have to turn it on. This
can be done by opening the USB 3D Sound
Configuration applet located in your system tray (click
on the USB icon to open up the Configuration
Screen).
2 Click on the button next to the S/PDIF Output text to
enable S/PDIF.
3 Set the Audio Output from the Tray.