10
Targus Notebook Security DEFCON® CL Combo Cable Lock
cabinet. If you plan to use the two screws, you can use
the base plate as a template to pre-drill the holes.
2 Use the abrasive pad, then the alcohol wipe to
prepare the area when you will attach the DEFCON
Security Base Plate.
3 After the alcohol dries, remove the backing on the
base plate to expose the adhesive and place it on the
prepared location. If desired, secure the base with the
two screws.
NOTE: W
HEN USING THE ADHESIVE BACKING, APPLY AT ROOM TEMPERATURE
-60°F (16°C), AND ALLOW IT TO BOND FOR MORE THAN 24 HOURS. NOT
RECOMMEND
TO USE IN OUTDOOR OR HIGH HUMIDITY ENVIRONMENT.
B
ONDING TO GLASS, CERAMIC TILE, WATER-ABSORBENT MATERIALS, COPPER,
BRASS, OR PLASTICIZED VINYL WITHOUT PRIMER SURFACE ARE NOT
To Next Page
Loading...
