UNIVERSAL
USB 3.0 DV4K
DOCKING STATION
WITH POWER
QUICK START GUIDE
410-3570-001A / DOCK177USZ
Workstation Setup Power Setup
1. Connect all peripheral devices to the docking station.
2. Connect the Targus Universal Docking Station to your host device.
3. Windows will start installing the DisplayLink Driver automatically.
4. Follow the on-screen instructions until the installation is complete.
5. Identify the correct power tip (see chart above right), connect to
the DC power cable and then to the laptop.
NOTE: If your power tip is not included, contact Targus to order
the correct version.
+
Features and specifications are subject to change without notice. Microsoft and Windows are registered
trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and
registered trademarks are the property of their respective owners. ©2017 Targus, 1211 North Miller
Street, Anaheim, CA 92806
Contents
• Targus Universal USB 3.0 DV4K
Docking Station with Power
• USB 3.0 Cable
• AC Power adapter
• DC output cable
• Power tip
Specifications
• 2 x DisplayPort (DP++; DP1.2) / HDMI Port (HDMI 2.0)
• 4 x USB 3.0 downstream ports (port marked with supports BC 1.2 and iOS device charging at 2.4A max)
• 1 x USB-C port (USB 3.0)
• Gigabit Ethernet
• Audio In/Out ports (3.5mm headset connector)
• Security lock slot
• USB 3.0 cable
• DC Power In: 19.5V, 6.15A
• DC Power Out: 19.5V 90W max
ACER 3A, 3P
3P
3P, 3W
3H, 3P, 3W
3P
3A, 3P
3H2, 3P, 3W
3I2, 3P, 3X9
3P
LAPTOP BRAND POWER TIP(S) LAPTOP BRAND POWER TIP(S)
ASUS
COMPAQ
DELL
FUJITSU
GATEWAY
HP
IBM/LENOVO
TOSHIBA
3A
ACER 3A, 3P
3P
3P, 3W
3H, 3P, 3W
3P
LAPTOP BRAND POWER TIP(S)
ASUS
COMPAQ
DELL
FUJITSU
1.Locate the correct power tip
(test fit in laptop if needed)
2. Connect to the power cord 3. Connect to your laptop
To Next Page
Need help?
General
