Need help?Do you have a question about the Tarsacci MDT 8000 and is the answer not in the manual?
Describes the function of Mode, Power, TS, GB, PP, Menu, and Arrow buttons for operation.
Explains indicators for modes, battery, cursor, volume, and settings like Target ID, Sensitivity, Discrimination, GB.
Instructions for activating and deactivating the Black Sand mode.
Instructions for activating Salt mode and adjusting the salinity level.
Understanding Target ID numbers for conductivity and target type.
Step-by-step guide to perform manual ground balance.
Step-by-step guide to perform automatic ground balance.
Procedure for balancing salinity in water, including depth and adjustment.
Explains the threshold range (-9 to 0) and its effect on signals.
Recommended settings for specific beach conditions.
Operating Environment| operating frequency | 6.4kHz/9kHz/12kHz/18kHz |
|---|---|
| operating temperature | -10C to +50C (+14F to +122F) |
| waterproof rating | IP68 (Up to 1.5 meters for up to 30 minutes) |
Power| battery type | 26650 Rechargeable Lithium-ion battery (3.7V @ 5000mAh) |
|---|---|
| battery life | Up to 18h@6.4kHz/24h@9kHz/30h@12kHz/36h@18kHz |
Display| display resolution | 128X64 Graphic LCD |
|---|---|
| lcd backlight | Yes |
| audio output | Speaker / Headphones |
Weight and Dimensions| weight | 1280g (2.82lb) including the battery |
|---|---|
| length | 965cm to 1346cm (38” to 53”) |
To Next Page